Skunk2 Pro-Series professional line of racing cams are designed to optimize mid-range and top-end HP and TQ; and significantly reduce lap times. VTEC crossover is seamless allowing for the broadest possible powerband. No other line of racing cams can even come close to the performance of the Pro-Series line.
Pro-Series [patent pending] camshaft profiles dramatically improve horsepower, torque, engine response, and valvetrain stability. The Pro1 cam is the BEST ALL-AROUND STREET CAM and dramatically improves horsepower, torque, engine response, and valvetrain stability. Pro-Series camshafts feature a seamless crossover between low and high speed cam lobes with [patent pending] profiles defined by specific lobe shapes as well as specific characteristics of lift, velocity, and acceleration. Pro-Series cams are all designed utilizing Skunk2’s proprietary Fast Ramp Technology and Amax Technology.
Use of these two technologies allows Skunk2 to design aggressive camshaft profiles that maximize area under the valve lift curve without adversely affecting valvetrain stability or reliability. In fact, the use of Fast Ramp and Amax Technologies actually makes Pro-Series camshafts more stable and less prone to spring surge at high rpms. Pro-Series camshafts also feature newly revised camshaft blanks that have increased torsional strength, improved durability characteristics, and reduced frictional effects; all of which are the reasons why Pro-Series camshafts are superior to all other cams.
Pro-Series camshafts are available in Pro 1, Pro 2, and Pro 3 designs.
- Pro 1: High Lift Street/Race cam designed to optimize mid-range and top end HP and TQ. Peak power is designed to occur at factory redline. Pro 1 cams also perform great in high-output turbo racing engines. Valvetrain upgrade required. Pro-Series valvetrain recommended.
- Pro 2: High Lift Street/Race cam designed to optimize mid-range and top end HP and TQ. Peak power is increased and power band is moved 700rpm higher than Pro 1. Pro-Series valvetrain required.
- Pro 3: Extreme Street/Race cam designed to optimize mid-range and top end HP and TQ. Peak power is increased and power band is moved 700rpm higher than Pro 2. No other high rpm racing cam can come close to the Pro 3. Pro-Series valvetrain required.
Inspection
Buyer shall inspect and reconcile all inbound shipments from SoundsandAccessories.com within three (3) Calendar days. Claims for shortages or damaged merchandise must be submitted to SoundsandAccessories.com no more than seven (7) Calendar days following Buyer's receipt of shipment.
Returns and Exchanges of Merchandise
A Returned Merchandise Authorization ("RMA") form must be filled out by the Buyer and Approved by SoundsandAccessories.com. Without an RMA issued and approved by SoundsandAccessories.com, Return shipments will be refused and sent back to sender at their expense.
Defective and freight damaged merchandise (only where SoundsandAccessories.com is providing shipment) may be returned to SoundsandAccessories.com for store credit, but only upon verification by SoundsandAccessories.com of such defect or damage. Credit will be issued to Buyer upon receipt of the RMA form and the claim approval from the freight company involved, No exceptions.
Returns of good merchandise may be accepted by SoundsandAccessories.com in its sole discretion under the following conditions:
Return/Exchange of merchandise in 100% Perfect and re-saleable condition, without markings on the original packaging will be restricted to extraordinary circumstances with prior approval from SoundsandAccessories.com. Accepted return will be assessed a 25% restocking charge. Returned parts shall not exceed 15% of total annual purchase quantities.
Return/Exchange of merchandise in packaging that has been marked, relabeled or otherwise defaced will be restricted to extraordinary circumstances with prior approval from SoundsandAccessories.com. Accepted returns will be assessed a 40% restocking charge. Returned parts shall not exceed 15% of total annual purchase quantities.
Merchandise classified by SoundsandAccessories.com as TB (To Be Discontinued), or DC (Discontinued), may not be returned for credit and are sold as is.
Merchandise on sales promotion or special order packages may not be returned for credit.
All return transportation charges are the responsibility of the buyer and will not be refunded for any reason.
Returns/Exchanges will not be accepted under any circumstances after 15 calendar days after the ship date indicated by SoundsandAccessories.com.
Any returns for product quality issues will require high resolution digital pictures of the products to be emailed to the account manager before an RMA is approved.
Order cancellations will take up to 72 hours after a cancellation is requested before the order is officially cancelled and money processed for return.